Additional Tidbits

There is a certain level of motivation that I think hits all of us when we have company coming to visit. At least I know it happens to me...and this is beyond the just wanting to clean up and have things look neat motivation. This is the let's get some shiite done motivation!

I have mentioned before that we had a substantial amount of water damage done to the house by the totally slacking property management company last year. I do realize that I have yet to actually post about that event but I have mentioned it in a few posts that I have put up here.

Anyhow, the downstairs bathroom was one of the most damaged parts of the house and is the only guest bathroom in the house. We lost the floor, several walls, 1/2 of the ceiling, insulation, and a huge 95 inch vanity that ran the length of one wall. We reinstalled the insulation and had the drywall and texturing done right away but paint, floors and vanity have been on the To Do list for some time.

 

The floor and vanity kind of rely on each other depending on what kind of vanity and what kind of flooring is being put in. It was looking more and more like we were going to be putting in a footed vanity rather than a kickplated vanity so reality is, flooring will have to be done first, but with a sale and a discount, this vanity was purchased and put into place temporarily so guests would have a place to put toiletries even if they couldn't use the sink. I hope to get it plumbed at least until we get ready to paint and do the floors so that it can be used soon. Right now, the knobs aren't installed, the top is not secured down and the faucet is not installed. Will get everything done but the top being secured since it will be easier to move it later with the top off.

Second little bug that got tackled was the painting of several covers around the house. Two of the exhaust van covers that can't be replaced with new, the doorbell cover and the intake vent cover all needed to be painted white and put back into place so there wouldn't be any gaping holes around the house. It took a couple of coats of spray paint to get all of the tan to white but they look much better now installed where they are supposed to be.

Little Tidbits At The Bamboo Lagoon

I have stalled out on a few things lately. Part of it is my weird brain and the mentality that each project relies on the completion of another project first and that in turn relies on another project which just keeps piling up until I practically get nothing done.

Yesterday, I decided I was going to knock out a few things regardless of what other projects were looming ahead because I was just sick of it.

Table assembled

So I started by vacuuming the entire upper floor (because I needed to use the vacuum in one of the projects downstairs and didn't want to drag it up and down the stairs more than I had to). Then I vacuumed the entire downstairs. I moved some projects that aren't going to be completed in the next week, into a closet to get them out of my way.

I put together this old 50's style table that has been sitting in pieces in one of the extra rooms so I could use it if necessary. Part of the reason it wasn't put together before this was because I need to paint that room and moving the table in and out of the room to paint is

Small window with blind

harder when it is put together, but since the painting isn't going to happen this week, I decided to forge on. The screws in the table were older flathead screws and one of them was missing so I made a run at lunchtime to our local hardware store to replace all the screws with Phillips Head screws so I could use the cordless drill instead of putting all 24 of them in by hand. While I was out, I picked up a healthy sandwich from the co-op for lunch.

Big window with blind

I rehung the two sets of blinds that I had repaired and cleaned a few months ago. Once again, the reason I hadn't done this before was due to wanting to paint the rooms that they are going in, but I am tired of not having the blinds up so I just put them up. Taking them down for painting won't be that big of a deal later. I had to replace one of the hanger clips on the larger blind but fortunately, I had an extra from the shop I had them fixed at.

I cleaned up the second of our extra rooms downstairs and put in the mats and the weight bench that has been sitting in the garage since last fall. Once again, painting was the reason this had not been done but I was sick of not having room in the
garage, and not being able to use the weight bench where it was. Hopefully this will motivate me to get back to weight lifting too. The downstairs of the house (because it is a split level) is much cooler than any other part of the house so that will be nice for exercising.

Pullup bar

I also installed in the doorway to that room the Perfect Pullup bar that I had purchased a while back. It isn't a good spot for someone that wants to do "real" pullups because of the low ceiling in that room in particular but because I
can't do real pullups yet (and J is not here to do them), I figure it will work for me doing the alternative methods until I get stronger. Once real pullups are required by one or both of us, we can move it to the other door frame where there is more ceiling clearance.

I am hoping that this motivation continues for a bit so I can continue to knock out a few things that have been lingering. Feels good to knock some niggling things off the list.

Sprinkler Issues

Old diaphragm

Well, it seems I spoke too quick.

While over 700 miles away, I get a text from our neighbor that our sprinklers are shooting water straight into the air in the middle of the day, which is not on the schedule. She let it run for a bit thinking the timer would turn it off and when it didn't, she thankfully came over and turned off the valve to the front yard system and spigot. Of course it was about 800 degrees here while we were gone too...

I am sure that the old diaphragm died...thought we would get one more week out of it, and we didn't. So I looked up the sprinkler people online, and called their supplier to order three diaphragms thinking we might as well replace all of them at once. They haven't come yet and I am starting to get worried since we can't water in the front at all unless by watering can.

Oh, and while the gushers were going, which of course I can't determine anything about yet, a lot of bark in one of the beds got washed out...more fun work to do...LOL. I am hoping that there is not another leak in the system somewhere else...

Update: Now that I think about it, we do have a spigot in the garage, I might see if it is still functioning with the front turned off, because I could put in a rotating sprinkler for the front in a few spots. Especially if the delivery doesn't come today. Have to wait until it gets shady in front though...

Functioning Sprinklers

One of the large popups

Okay, it seems that we have a fully functioning auto sprinkler system in the front yard. I don't have it set exactly as I want it but it will do for now. I still need to order the diaphragms for the valves but right now, none of them seem to be leaking so I am not super worried about that just yet.

So the other day, after my trip to Ewing and the packed full brain of all the info that they gave me, I replaced all the sprinklers that I had purchased replacement parts for, and I put the old diaphragm back into the valve so that I could turn the system on and find the rest of the missing popups.

New small popups

I figured out pretty quick that I didn't have the big popups in right because they were both watering the street instead of the lawn but I was able to just grab them and "ratchet" them around like the folks at Ewing had told me.

While the sprinklers were on, I ran through the yard with my homemade markers and found the missing small popups as well as three more that I didn't even know about. I marked them all and made another trip to Ewing for more small popups.

While running the system again, I also realized that some of the small popups I got were

Blue tape marks the spot

spraying way farther than I needed them too, so I traded 5 of them in for smaller distance heads.

Today, I dug up all the remaining marked popups that needed to be replaced and went through and replaced each one. Some of the popups were so buried in vegetation that I had to cut them out a little hole to see through. They are clear enough to pop up but I will need to clear more vegetation if I want them to spray as far as they are supposed to.

New guts and head

I then turned on the system to see if I had them set the way I wanted. I realized when I was working on the last one that the system was installed in 2000-2001 timeframe when I think the sod for the front yard was done. Make sense that some of them have tilted a bit with the growth of the yard. I got soaked while figuring out the settings for each head but it kind of felt good since we had a close to 90 degree day today.

Once I was sure they were all spraying the way that I wanted them to, I set the auto system up to water on odd numbered days so it should water tomorrow morning, and I'll know if it is working as it should on a schedule. Fingers crossed that it all functions as it should.

Pruning Again

Before

Yardwaste day was creeping up on me and I wanted to get that bin filled up so I would feel like we were getting our money's worth. There is so much to do here in the yard that at times it is completely overwhelming but there is nothing to do about that but tackle one thing at a time.

We have a second Purple Plum tree in the backyard that is in desperate need of pruning and while I can't prune it as it needs to be done, I definitely can make a dent.

Tools of the trade

This tree sits right off our back deck and the branches at the bottom were so low that you would hit them walking down the steps on that side. There was some dead stuff in there too, and a ton of crossing branches and suckers from previous trimmings.

I grabbed the small pruners, the big loppers and set to work. It only took me a few minutes to realize that I was going to need more than those two tools. I had spread out a tarp on the deck because when I pruned the front plum tree, I found out how much of a mess cleaning up these branches could be when there were plums already on them.

In the driveway

I went back to the garage and decided what I needed was our sawsall with the new pruning blade on it. This was a perfect excuse to bring out a power tool and I was looking for any excuse. So grabbed the sawsall, our new blade, and the extension cord, set it all up and set to work.  With the sawsall, I was able to take out a couple of big branches I would have not been able to do before.

After

Once I got everything cut off the tree, I bundled up the smaller stuff on the tarp and took it down to the driveway to be cut into small bits to put in the bin. I had to drag the two bigger branches to the driveway on their own since they wouldn't fit in the tarp and I didn't want to mess up anything else during the course of dragging them down the side of the house.

It took a good 30 minutes to cut most of the smaller  pieces up to fit in the bin and then I had to fire up the sawsall again on the two branches to cut them in thirds. None of them were more than two inches in diameter so it was no problem.

If you look at the tree now, it looks a lot better even if it isn't as good as it would be should we hire a professional. And it is great to be able to walk under it without getting hit in the head by branches.